Skip to content
Flashing Repair by 24/7 Storm Roofer
Roof Repairs

Flashing Repair

Flashing is the metal that bridges the places where the roof meets walls, chimneys and vents. When it bends, lifts or corrodes, water runs behind it. We replace damaged flashing, rebuild step and counter flashing and seal details so water takes the path you intended.

  • TypesStep, counter, apron, valley, drip edge
  • MaterialsAluminum, galvanized, copper
  • Common fixesReplace, re-bend, re-seal
  • CheckWall and siding tie-ins
What you get

What is included

  1. 1Leak source treatedWe fix the cause, not the stain.
  2. 2Right metalMatched to the roof and the climate.
  3. 3Layered correctlyShingles and flashing overlap the right way.
  4. 4Sealed and testedWater test where practical.
How it works

From your first call to a finished roof

We respond across Tennessee, Alabama and the South. Find your city below and tell us what happened.

  1. 1You call or send the formDescribe the problem and where it sits on the roof, with photos if you can. We will tell you what to do while you wait.
  2. 2A crew heads your wayWe inspect the area, trace how water gets in and mark every spot that needs work, not only the obvious one.
  3. 3We stop the damage and show you the planYou see the repair, the materials and the price in writing before we start.
  4. 4We finish the job and walk it with youWe make the repair, seal and test it, clean up and show you the finished work.
Good fit when

Is this what your roof needs?

  • A leak appears at a wall or dormer
  • Flashing looks rusted, bent or lifted
  • Sealant is cracked or missing
  • A past repair relied on tar
Good to know

What makes a repair last

  • The cause, not the stainWe fix where water enters, not where it shows.
  • Matched materialsMetal, sealant and shingles chosen for your roof.
  • TestedChecked before we leave.
Questions

Common questions

Why do flashing leaks happen?

Metal bends, seals dry out and nails back out. Water finds the gap.

Is caulk enough?

Caulk can help short term but fails. Proper flashing is the lasting solution.

Do I need new siding work too?

Sometimes the siding needs to be lifted to tuck flashing in. We tell you.

Where we respond

Find your city

Type your city to open the page for emergency roofing near you. We respond across Tennessee, Alabama and the South.

Start typing, for example a city name.

    Roof damaged? Call now.

    Call or text 24/7 Storm Roofer any hour, or send the form with your address and what happened. We reply with clear next steps and a crew when it is safe to work.

    Roof damaged?

    Tell us what happened.

    Give us your address, what the storm did and how to reach you. We read every message and reply with clear next steps and a crew when it is safe to work. In an emergency, call or text instead.

    • Your address or city, what you see and whether water is coming in. Photos from the ground are plenty, and a perfect description is never required
    • Anything you saved from a Storm Kit tool, so we do not ask you twice
    • Emergency cover first, then dated photos, a written scope and a clear price before the permanent repair, and a clean property when we leave
    Water coming in? Call or text, any hour(800) 207-0499

    Your roofing request

    Prefer to type? Text your request. We only use your details to respond to your request.