Skip to content
A flat lay on a truck tailgate of roofing essentials: a tape measure, hammer, roll of blue tarp, cap nails, a shingle sample, a flashlight and a rolled roof diagram
Glossary

Roofing Glossary: Terms in Plain English

Dry-in, batten, flashing, valley, ice dam, ponding and more, explained in a sentence or two.

Dry-in
Covering a stripped roof deck with underlayment so it sheds water until the final roof goes on.
Tarp
A heavy-duty reinforced sheet used as a temporary cover over a damaged roof.
Batten
A strip of wood screwed to the roof to hold a tarp tight without tearing it.
Board-up
Closing a hole in the roof or wall with plywood.
Decking
The boards or panels under the shingles that make the roof surface, also called sheathing.
Underlayment
A water-resistant layer laid over the decking and under the shingles.
Ice and water barrier
A self-adhering membrane placed at eaves and valleys to stop leaks from ice dams and wind-driven rain.
Flashing
Metal pieces that direct water away where the roof meets a wall, chimney or vent.
Step flashing
Small L-shaped pieces woven into shingle courses along a wall or chimney.
Counterflashing
Metal set into a wall or chimney that overlaps the flashing below it.
Valley
The inside angle where two roof slopes meet and carry water downhill.
Ridge cap
The shingles or metal that cover the peak where two slopes meet.
Pipe boot
A rubber or metal collar that seals the roof around a plumbing vent pipe.
Nail pop
A nail that has pushed up through a shingle, leaving a hole for water.
Granules
The small stones on a shingle surface that protect it from the sun; hail can knock them off.
Crease
A line across a shingle where wind bent it and broke the mat.
Ice dam
A ridge of ice at the eave that blocks melting snow and forces water under shingles.
Soffit
The underside of the roof overhang, often vented to let the attic breathe.
Fascia
The board along the roof edge that carries the gutter.
Ponding
Water that stays on a flat roof for a day or more after rain.
Membrane
A sheet roofing material such as TPO or EPDM used on flat and low-slope roofs.
Class 4 shingle
A shingle tested to resist hail impact at the highest standard rating.
Scope of work
A written list of the repairs, materials and methods for a job.
Adjuster
The person who inspects damage for an insurance company.

Still have a question?

Call or text, or send the form. We are happy to explain.

Roof damaged?

Tell us what happened.

Give us your address, what the storm did and how to reach you. We read every message and reply with clear next steps and a crew when it is safe to work. In an emergency, call or text instead.

  • Your address or city, what you see and whether water is coming in. Photos from the ground are plenty, and a perfect description is never required
  • Anything you saved from a Storm Kit tool, so we do not ask you twice
  • Emergency cover first, then dated photos, a written scope and a clear price before the permanent repair, and a clean property when we leave
Water coming in? Call or text, any hour(800) 207-0499

Your roofing request

Prefer to type? Text your request. We only use your details to respond to your request.